Ai+ pulse 1 FRP lock guide & solution [free file Download]

Learn how to bypass the FRP lock on Ai+ Pulse 1 using the official PAC firmware file and SPD Upgrade Tool. Step-by-step guide with requirements, flashing process, and safety tips.

What is FRP Lock?

Factory Reset Protection (FRP) is a built-in Android security feature designed to protect your phone from unauthorized access after a factory reset. On the Ai+ Pulse 1, FRP ensures that only the original Google account owner can reactivate the device.

If you’ve forgotten your credentials, flashing the stock firmware with a PAC file via the SPD Upgrade Tool is a reliable solution.

📦 Requirements

Before starting, make sure you have the following:

Ai+ Pulse 1 PAC file (official firmware package)
SPD Upgrade Tool (Spreadtrum flashing utility)
Spreadtrum USB Drivers installed on your PC
Windows computer + USB cable

🛠 Step-by-Step FRP Bypass Guide

1. Install Spreadtrum Drivers

Download and install Spreadtrum USB drivers on your PC. Restart your computer to ensure proper detection.

2. Launch SPD Upgrade Tool

Open the SPD Upgrade Tool and click Load Packet. Select the Ai+ Pulse 1 PAC firmware file.

3. Connect Your Device

Power off the Ai+ Pulse 1 completely.
Hold the Volume Down button and connect the phone via USB.
The tool should recognize the device automatically.

4. Start Flashing

Click Start Downloading in SPD Tool. The firmware will begin flashing. Wait until you see the green “Passed” message.

5. Reboot & Setup

Disconnect the phone and power it on. The FRP lock will be removed, allowing you to set up the device with a new Google account.

⚠️ Important Notes

This process erases all data on the device.

Always use the official PAC file for your exact model to avoid bricking.

If you’re not confident with flashing, visit an authorized service center.

✅ Conclusion

By flashing the Ai+ Pulse 1 with its PAC firmware using the SPD Upgrade Tool, you can safely bypass the FRP lock and restore full access. This method is straightforward, effective, and widely used by technicians for Spreadtrum-based devices.

⬇️ Download

File name - Ai+ pulse frp file & tool

File size -7.5 mb

Password - FRPLOCHA

⬇️ Download file

❓ Frequently Asked Questions (FAQ)

What is FRP lock?

FRP (Factory Reset Protection) is a security feature on Android devices that prevents unauthorized access after a factory reset. It requires the original Google account credentials to reactivate the phone.

Why does my Ai+ Pulse 1 show FRP lock?

Your Ai+ Pulse 1 shows FRP lock because it was reset without removing the Google account. This is a safeguard to protect your data from theft.

Can I bypass FRP without a PAC file?

Yes, some methods involve Wi-Fi tricks or third-party apps, but the most reliable and safe solution is flashing the official PAC firmware using the SPD Upgrade Tool.

What is the SPD Upgrade Tool?

The SPD Upgrade Tool is the official flashing utility for Spreadtrum/Unisoc devices. It allows you to load PAC files and re-flash your phone’s firmware.

Does flashing remove all my data?

Yes, flashing with a PAC file erases all data on your Ai+ Pulse 1. Make sure to back up important files before proceeding.

Can I do this without a computer?

No, the PAC file and SPD Upgrade Tool method requires a Windows PC. Mobile-only tricks are less reliable and often patched by updates.